|
How to read REXNORD bearing numbers.
Industrial roller bearings
Rexnord industrial nomenclature consists of 4 basic sections as illustrated below:
Example: A ZD 08 5 215 38
A - Prefix - Initial A or B indicates optional auxiliary caps
ZD - Z indicates "Z" seal; "M" seal ("G" seal in larger sizes) or "K" seal are optional as: "KD-") balance indicates,housing type.'
08 - Series code - Indicates series relationship of basic bearing (Not used on all types).
5 - Basic bearing size - "5" indicates heavy duty; "2" normal duty" "9" adapter series, sleeved to smaller bore size.
215 - bore size = 2-15/16 inches 115 = 1-15/16 inch, etc.
38 - Suffix - Modifications to base unit as indicated in list.
Aircraft roller bearings
Old" style nomenclature consists of three basic sections as follows:
Example: AB 4 H
AB - Prefix - basic bearing type
4 - Bore size in 1/16 inch, "4" = 1/4 inch bore (Note: for YD and YS prefix, this section is non-significant, assigned sequentially.)
H - Suffix - Only "H", "L"» "M", "R", "T" and "W" are significant as shown in list. Others are non-significant representing different modifications to base unit. (For "YD" and "YS", all non-significant. )
"New" style nomenclature consists of 6 basic sections as follows:
Example: SM 4 - 6 A - j L
SM - Prefix - basic bearing configuration as indicated on list.
4 - Bore size in 1/16 inch; "4" - 1/4 inch bore
6 - Dimensional identification - for annular bearings - nominal O.D. to nearest 1/16 inch "6" - 0.375 nominal O.D. — for rod end bearings - nominal thread diameter (or shank O.D. if not threaded) to nearest 1/16 inch
A - Dimensional variations - expressed as non-significant alphabetic symbols. (Addition of one digit to this section indicates customer approval rights).
j - Suffix - modifications to basic unit as indicated on the list.
L - Used only for rod end bearings with left-hand threads.
Friction bearings
Teflon fabric lined bearings with alphabetic prefix are identified as follows:
Example: TFA 1 W
TFA - Prefix - basic bearing type as indicated on list.
1 - Bore size - expressed in 1/16 inch
W - Suffix - only "L" and "W" are significant as indicated on list, are assigned sequentially for modifications of basic unit.
Part number system
| Prefix | Suffix | Definition | | . | 04 | (INDUSTRIAL ONLY) COVER 2 NOTCHES LOOSER (2/12 TURN) | | . | 05 | (INDUSTRIAL ONLY) COVER 1 NOTCH LOOSER (1/12 TURN) | | . | 06 | (INDUSTRIAL ONLY) COVER 1 NOTCH TIGHTER (1/12 TURN) | | . | 07 | (INDUSTRIAL ONLY) COVER 2 NOTCHES TIGHTER (2/12 TURN) | | . | 1 | (AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE | | . | 10 | (INDUSTRIAL ONLY) 1/8 INCH PIPE PLUG IN GREASE HOLE | | . | 10* | (AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE , TWO LUBE FITTINGS, NAS516 KEYWAY OR KEY SLOT. | | . | 11 | (INDUSTRIAL ONLY) #1184 ALEMITE BUTTON HEAD FITTING 1/8 P.T. | | . | 11* | (AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, TFE-FIBERGLASS SEAL, NAS516 KEYWAY OR KEY SLOT. | | . | 12 | (INDUSTRIAL ONLY) #1461 ALEMITE STANDARD DOT FITTING 1/8 P.T. | | . | 12* | (AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. | | . | 13* | (AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TWO LUBE FITTINGS. | | . | 14 | (AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TFE-FIBERGLASS SEALS. | | . | 14 | (INDUSTRIAL ONLY) #1831 ALERNITE GIANT BUTTON HEAD FITTING 1/8 P.T. | | . | 15 | (INDUSTRIAL ONLY) #1612 ALEMITE 65 DEGREE 1/8 P.T. | | . | 15* | (AIRCRAFT ONLY) PRELOADED INTERNAL FIT, NAS516 KEYWAY OR KEY SLOT. | | . | 16 | (INDUSTRIAL ONLY) A-336 ALEMITE 1/8 P.T. | | . | 16* | (AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS. | | . | 16A | (INDUSTRIAL ONLY) M-336 ALEMITE 1/8 P.T. | | . | 17 | (INDUSTRIAL ONLY) #1688 ALEMITE 1/8 P.T. | | . | 17* | (AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TWO LUBE FITTINGS, NAS516 KEYWAY OR KEY SLOT. | | . | 18 | (INDUSTRIAL ONLY) #1613-B ALEMITE 1/8 P.T. | | . | 18* | (AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. | | . | 19 | (INDUSTRIAL ONLY) STAINLESS STEEL THREADED ROD, TAKE-UP UNITS | | . | 19* | ROD ENDS ONLY- (AIRCRAFT ONLY) PRELOADED INTERNAL FIT, TWO LUBE FITTINGS, TFE-F IBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOTS. | | . | 2 | (AIRCRAFT ONLY) ANNULAR BEARING (OTHER THAN TORQUE TUBE TYPE) PRELOADED TO 3 PERCENT -7 PERCENT OF RADIAL LIMIT LOAD RATING; ROD END BEARING PRELOADED TO 4 PERCENT - 8 PERCENT OF RADIAL LIMIT LOAD RATING. | | . | 20 | (INDUSTRIAL ONLY) 1/4 INCH PIPE PLUG IN GREASE HOLE | | . | 20* | ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS. | | . | 21 | (INDUSTRIAL ONLY) #1186 ALEMITE BUTTON HEAD FITTING 1/4 P.T.,** (USE -11) | | . | 21* | ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, NAS516 KEYWAY OR KEY SLOT. | | . | 22 | (INDUSTRIAL ONLY) #14 89 ALEMITE MOGUL DOT FITTING 1/4 P.T. | | . | 22* | ROD ENDS ONLY- (AIRCRAFT ONLY) TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. | | . | 23 | (INDUSTRIAL ONLY) #1823 ALEMITE GIANT BUTTON HEAD FITTING 1/4 P.T. | | . | 23* | ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. | | . | 24 | (INDUSTRIAL ONLY) #45120 1/4 INCH TO 1/8 INCH REDUCER WITH 1613 ALEMITE 85 DEGREE ANGLE FITTING 1/8 P.T. | | . | 24* | ROD ENDS ONLY- (AIRCRAFT ONLY) NO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. | | . | 25 | (AIRCRAFT ONLY) ONE ALEMITE 3019 LUBE FITTING, TFE-FIBERGLASS SEALS, NAS516 KEYWAY (APPLIED TO DM AND DMH ROD ENDS WITH EYE O.D. OVER 1.5 INCHES ONLY). | | . | 25 | (INDUSTRIAL ONLY) A359 ALEMITE, 1/4 PIPE TAP FITTING,** (USE -16). | | . | 26 | (INDUSTRIAL ONLY) 5410 LINCOLN OR 16133 ALEMITE FITTING | | . | 26* | ROD ENDS ONLY- (AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, NO GREASE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT. | | . | 27 | (INDUSTRIAL ONLY) NO GREASE FITTING | | . | 27* | ROD ENDS ONLY- (AIRCRAFT ONLY) THREADS PER KIL-S-8879. | | . | 28 | (INDUSTRIAL ONLY) #5099 LINCOLN FITTING, RELIEF TYPE | | . | 28* | ROD ENDS ONLY- (AIRCRAFT ONLY) THREADS ROLLED AFTER HEAT TREAT. | | . | 29 | (INDUSTRIAL ONLY) #1962 MONEL ALEMITE FITTING | | . | 29* | ROD ENDS ONLY- (AIRCRAFT ONLY) THREADS ROLLED AFTER HEAT TREAT, THREADS PER MIL-S-8879. | | . | 3* | (AIRCRAFT ONLY) TWO GREASE FITTINGS. | | . | 30 | (INDUSTRIAL ONLY) NORMAL DUTY UNIT ( 1 COLLAR OMITTED) | | . | 30* | ROD ENDS ONLY- (AIRCRAFT ONLY) NO GREASE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, THREADS ROLLED AFTER HEAT TREAT, THREADS PER MIL-S-8879. | | . | 31 | (INDUSTRIAL ONLY) HEAVY DUTY UNIT (COLLAR OMITTED ON HOUSING SIDE ONLY) | | . | 31* | ROD ENDS ONLY- (AIRCRAFT ONLY) NO GREASE FITTINGS, TFE-FIBERGLASS SEALS. | | . | 32 | (AIRCRAFT ONLY) TFE-FIBERGLASS SEALS, GREASE PER MIL-G-81322. | | . | 32 | (INDUSTRIAL ONLY) HEAVY DUTY UNIT (BOTH COLLARS OMITTED) | | . | 33 | (INDUSTRIAL ONLY) NO NAME PLATE | | . | 33* | ROD ENDS ONLY- ROD ENDS ONLY- (AIRCRAFT ONLY) NO GREASE FITTINGS, TFE-FIBERGLASS SEALS, GREASE PER MIL-G-81322. | | . | 34 | (INDUSTRIAL ONLY) PLAIN CARTON (IMPRINTED) | | . | 34* | ROD ENDS ONLY- (AIRCRAFT ONLY) TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, GREASE PER MIL-G-81322 | | . | 35* | ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, GREASE PER MIL-G-81322. | | . | 36 | (INDUSTRIAL ONLY) REVERSED COVER AND "M" SEAL ASSEMBLY, PERMATEX #2 ON THREADED COVER 0.D. | | . | 36* | ROD ENDS ONLY- (AIRCRAFT ONLY) NO GREASE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, GREASE PER MIL-G-81322. | | . | 37 | (INDUSTRIAL ONLY) (SPECIAL) (LAPPED BEARING) | | . | 37* | ROD ENDS ONLY- (AIRCRAFT ONLY) NO GREASE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, THREADS ROLLED AFTER HEAT TREAT, THREADS PER MIL-S-8879, GREASE PER MIL-G-81322. | | . | 38 | (INDUSTRIAL ONLY) TACONITE SEAL ARRANGEMENT IN AUXILIARY CAP WITH "M" SEAL. | | . | 38* | ROD ENDS ONLY- (AIRCRAFT ONLY) HO LUBE FITTINGS, TFE-FIBERGLASS SEALS, GREASE PER MIL-G-81322. | | . | 39* | ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, THREADS ROLLED AFTER HEAT TREAT, THREADS PER MIL-S-8879. | | . | 4 | (AIRCRAFT ONLY) TFE-FIBERGLASS SEAL. | | . | 40 | (INDUSTRIAL ONLY) NO LUBRICATION IN UNIT - RUST PREVENTATIVE ON BEARING | | . | 40* | ROD ENDS ONLY- (AIRCRAFT ONLY) TWO LUBE FITTINGS, TFE-FIBERGLASS SEALS, NAS516 KEYWAY OR KEY SLOT, THREAD PER MIL-S-8879. | | . | 400 TO 499 | (AIRCRAFT ONLY) RESTRICTED USE FOR HIGH TEMPERATURE ENVIRONMENT ONLY. | | . | 41 | (AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, TFE-FIBERGLASS SEALS, GREASE PER MIL-G-81322. | | . | 41 | (INDUSTRIAL ONLY) LUBRICATED WITH DOW CORNING £41 | | . | 42 | (AIRCRAFT ONLY) GREASE PER MIL-G-81322. | | . | 42 | (INDUSTRIAL ONLY) LUBRICATED WITH SOCONY MOBIL BRB 14 | | . | 43 | (INDUSTRIAL ONLY) LUBRICATED WITH MOBIL TEMP #1 | | . | 44 | (INDUSTRIAL ONLY) LUBRICATED WITH LUBRIPLATE 630AA | | . | 45 | (INDUSTRIAL ONLY) LUBRICATED WITH SHELL ALVANIA #2 | | . | 46 | (INDUSTRIAL ONLY) 2/3 - 3/4 FILLED WITH LUBRICANT | | . | 47 | (INDUSTRIAL ONLY) LUBRICATED WITH LUBRIPLATE 630-2 | | . | 48 | (INDUSTRIAL ONLY) LUBRICATED WITH MOBILPLEX EP#2 | | . | 49 | (INDUSTRIAL ONLY) LUBRICATED WITH ENARCO NATEX GREASE £2 (NATIONAL REFINING CO.) | | . | 5* | (AIRCRAFT ONLY) NAS516 KEYWAY OR KEY SLOT. | | . | 50 | (INDUSTRIAL ONLY) LUBRICATED WITH MOBILPLEX EP#1 | | . | 500 TO 599 | (AIRCRAFT ONLY) RESERVE FOR NON-STANDARD VARIATIONS. | | . | 51 | (INDUSTRIAL ONLY) LUBRICATED WITH LUBRIPLATE 930-AA | | . | 52 | (INDUSTRIAL ONLY) LUBRICATED WITH LUBRIPLATE 930-A | | . | 53 | (INDUSTRIAL ONLY) LUBRICATED WITH MASTER LUBRICANTS M24M | | . | 54 | (INDUSTRIAL ONLY) LUBRICATED WITH AEROSHELL #14 | | . | 55 | (INDUSTRIAL ONLY) LUBRICATED WITH MARFAX #2 | | . | 56 | (INDUSTRIAL ONLY) LUBRICATED WITH MIL-G-23827 | | . | 57 | (INDUSTRIAL ONLY) LUBRICATED WITH KEYSTONE 89H | | . | 58 | (INDUSTRIAL ONLY) LUBRICATED WITH KEYSTONE 78 MEDIUM | | . | 59 | (INDUSTRIAL ONLY) LUBRICATED WITH PURE OIL CO. HTEP £2 | | . | 6* | (AIRCRAFT ONLY) REDUCED CLEARANCE, TWO LUBE FITTINGS | | . | 60 | (INDUSTRIAL ONLY) GARLOCK SEALS WITH BRASS CASE AND BERYLLIUM COPPER SPRINGS. | | . | 61 | (INDUSTRIAL ONLY) GARLOCK SEALS WITH STAINLESS STEEL CASE AND BERYLLIUM COPPER SPRINGS. | | . | 67 | (INDUSTRIAL ONLY) "M" WIPING SEAL - HOUSING SIDE ONLY, LIP OUT | | . | 68 | (INDUSTRIAL ONLY) "M" WIPING SEAL - COVER SIDE ONLY, LIP PUT | | . | 69 | (INDUSTRIAL ONLY) PRESS FIT BETWEEN HOUSING AND OUTER RACES - PROVIDED BY SMALLER BORE IN STANDARD HOUSING | | . | 7 | (AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, TFE-FIBERGLASS SEAL | | . | 70 | (INDUSTRIAL ONLY) MALLEABLE IRON HOUSING | | . | 71 | (INDUSTRIAL ONLY) Z METAL HOUSING. | | . | 72 | (INDUSTRIAL ONLY) CAST STEEL HOUSING | | . | 73 | (INDUSTRIAL ONLY) BRONZE HOUSING | | . | 8* | (AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, NAS516 KEYWAY OR KEY SLOT. | | . | 80 | (INDUSTRIAL ONLY) UNIT RETAPPED FOR 1/4 INCH PIPE AND EQUIPPED WITH STANDARD 21627-B ALEMITE FITTINGS | | . | 81 | (INDUSTRIAL ONLY) UNIT RETAPPED WITH 1/4 INCH PIPE TAP - DESIGNATE FITTING BY PROPER SUFFIX NUMBER (EXAMPLE: 2181: UNIT WITH 1/4 INCH P.T.. AND J1186 ALEMITE BUTTON HEAD FITTING) . | | . | 82 | (INDUSTRIAL ONLY) TFE-FABRIC LINED INNER RACE BORE | | . | 84 | (INDUSTRIAL ONLY) HEAVY DUTY BEARING WITH LIFEGARD SEALS | | . | 85 | (INDUSTRIAL ONLY) NORMAL DUTY BEARING WITH LIFEGARD SEALS | | . | 88 | (INDUSTRIAL ONLY) STANDARD NORMAL DUTY BEARING ASSEMBLY WITH "M" SEALS | | . | 89 | (INDUSTRIAL ONLY) STANDARD HEAVY DUTY BEARING ASSEMBLY WITH "M" SEALS | | . | 9* | (AIRCRAFT ONLY) REDUCED INTERNAL CLEARANCE, TWO LUBE FITTINGS, TFE-FIBERGLASS SEAL. | | . | 90 | (INDUSTRIAL ONLY) ADAPTER BEARING ASSEMBLY, INCLUDING ADAPTER SLEEVE, LOCK-NUT AND LOCK-WASHER, WITH "M" SEALS. | | . | 91 | (INDUSTRIAL ONLY) STANDARD NORMAL DUTY BEARING ASSEMBLY ONLY | | . | 92 | (INDUSTRIAL ONLY) STANDARD NORMAL DUTY BEARING ASSEMBLY WITH " Z" SEALS | | . | 93 | (INDUSTRIAL ONLY) STANDARD NORMAL DUTY BEARING ASSEMBLY WITH "K" -SEALS | | . | 94 | (INDUSTRIAL ONLY) STANDARD HEAVY DUTY BEARING ASSEMBLY ONLY | | . | 95 | (INDUSTRIAL ONLY) STANDARD HEAVY DUTY BEARING ASSEMBLY WITH "Z" SEALS | | . | 96 | (INDUSTRIAL ONLY) STANDARD HEAVY DUTY BEARING ASSEMBLY WITH "K" SEALS | | . | 97 | (INDUSTRIAL ONLY) STANDARD ADAPTER BEARING ASSEMBLY INCLUDING ADAPTER SLEEVE LOCK-NUT AND LOCK-WASHER ONLY | | . | 98 | (INDUSTRIAL ONLY) STANDARD ADAPTER BEARING ASSEMBLY INCLUDING ADAPTER SLEEVE, LOCK-NUT AND LOCK -WASHER WTIH "Z" SEALS | | . | 99 | (INDUSTRIAL ONLY) STANDARD ADAPTER BEARING ASSEMBLY INCLUDING ADAPTER SLEEVE, LOCK-NUT AND LOCK-WASHER WITH "K" SEALS I | | . | A | ONE OPEN AUXILIARY CAP SEAL INSTALLED ON COVER SIDE OF INDUSTRIAL ROLLER BEARING. | | . | AZ | BEARING PRE-LUBRICATED WITH TEXACO 984, MIL-G-7421 GREASE,***. | | . | B | ONE CLOSED AUXILIARY CAP SEAL INSTALLED ON COVER SIDE OF INDUSTRIAL ROLLER BEARING | | . | C | CENTER GUIDE RING INSTALLED BETWEEN RETAINERS IN INDUSTRIAL ROLLER BEARINGS. | | . | E | DOUBLE-ROW INDUSTRIAL ROLLER BEARING WITH ONE PIECE OUTER RING (CUP),*** | | . | F | FOUR-BOLT HOLE CONSTRUCTION, INDUSTRIAL ROLLER BEARING PILLOW BLOCK. | | . | G | LUBRICATION FITTING FOR AIRCRAFT ROLLER ROD END BEARING,*** | | . | G | INDUSTRIAL BEARING THREADED COVER LOCKED BY SET SCREWS. | | . | H | AIRCRAFT ROLLER BEARING EQUIPPED WITH BERYLLIUM COPPER RETAINERS, TFE-FIBER GLASS SEALS, AND REGULAR (MIL-G-2 3827) LUBRICANT, INTENDED FOR CONTINUOUS OPERATION AT 250°F OR INTERMITTENT OPERATION TO 300°F. | | . | H | REVERSE ASSEMBLY FOR INDUSTRIAL ROLLER BEARING. | | . | L | LEFT HAND THREADS, ROD END BEARINGS. | | . | M | AIRCRAFT ROLLER BEARING ROD END EQUIPPED WITH TWO OR MORE GREASE FITTINGS (EXCEPTION MR-4AM) . | | . | N | SPECIAL SLOTTING OF THREADED SHANK, AIRCRAFT ROLLER ROD END BEARING,*** | | . | P | AIRCRAFT ROLLER BEARING WITH CONTACT SEALS,*** | | . | P | PRECISION BORE INDUSTRIAL ROLLER BEARING | | . | PL | PRECISION AND LAPPED INDUSTRIAL ROLLER BEARING. | | . | R | REDUCED INTERNAL BEARING FIT, AIRCRAFT ROLLER BEARING | | . | R | PRESS FIT OUTER RACE O.D. , INDUSTRIAL ROLLER BEARING. | | . | RB | REDUCED INTERNAL FIT AND CLOSE BORE TOLERANCE, AIRCRAFT ROLLER BEARING, *** | | . | S | MACHINE PILOT ON FACE OF INDUSTRIAL ROLLER BEARING FLANGE UNIT. | | . | S | SINGLE-ROW INDUSTRIAL ROLLER BEARING, RADIAL THRUST,*** | | . | T | DOUBLE-ROW AIRCRAFT ROLLER BEARING WITH A PRELOAD OF FROM 5 PERCENT -7 PERCENT OF RADIAL LIMIT LOAD RATING; SINGLE-ROW AIRCRAFT ROLLER BEARING WITH A PRELOAD OF 7 PERCENT - 10 PERCENT OF RADIAL LIMIT LOAD RATING. | | . | T | WEDGE LOCK IN THREADED COVER, INDUSTRIAL ROLLER BEARING UNIT | | . | W | INDUSTRIAL ROLLER BEARING WITH "WING TYPE" RETAINER,*** | | . | W | FEMALE ROD END BEARING WITH NAS 513 KEY SLOT IN BOTTOM OF SHANK; MALE ROD END WITH NAS 513 KEYWAY IN FACE SIDE OF SHANK. | | . | X | ROD END BEARINGS WITH THREADS ROLLED AFTER HEAT TREAT,*** | | 10 | . | (FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, SLOT-LOADED, CHAMFERED OUTER RING. | | 101 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, TFE-FABRIC LINED, PLAIN, STEEL OR ALUMINUM (CONFORMING TO MS21240) . | | 102 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, TFE-FABRIC LINED, FLANGED, UNLINED FLANGE FACE, STEEL OR ALUMINUM. | | 103 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, TFE-FABRIC LINED, FLANGED, LINED FABRIC FACE, STEEL OR ALUMINUM, (MS21241) . | | 11 | . | (FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, NARROW, CHAMFERED OUTER RING. | | 111 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, TFE-FABRIC LINED, SLEEVE IN BORE. | | 12 | . | (FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, NARROW GROOVED OUTER RING. | | 13 | . | (FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, WIDE, CHAMFERED OUTER RING. | | 14 | . | (FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, WIDE > GROOVED OUTER RING. | | 15 | . | (FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, HIGH MISALIGNMENT, CHAMFERED OUTER RING. | | 16 | . | (FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, HIGH MISALIGNMENT, GROOVED OUTER RING. | | 17 | . | (FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, BUSHED BORE, CHAMFERED OUTER RING. | | 18 | . | (FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, BUSHED BORE, GROOVED OUTER RING. | | 19 | . | (FRICTION PRODUCTS ONLY) SPHERICAL ANNULAR BEARING, SLOT-LOADED, GROOVED OUTER RING. | | 31 | . | (FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, RIGHT HAND THREAD. | | 32 | . | (FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, RIGHT HAND THREAD. | | 33 | . | (FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, LEFT HAND THREAD. | | 34 | . | (FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, LEFT HAND THREAD. | | 35 | . | (FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, RIGHT HAND THREAD WITH KEYWAY. | | 36 | . | (FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, RIGHT HAND THREAD WITH KEY SLOT. | | 37 | . | (FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, LEFT HAND THREAD WITH KEYWAY. | | 38 | . | (FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, LEFT HAND THREAD WITH KEY SLOT. | | 41 | . | (FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, RIGHT HAND THREADS. | | 42 | . | (FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, RIGHT HAND THREADS. | | 43 | . | (FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, LEFT HAND THREADS. | | 44 | . | (FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, LEFT HAND THREADS. | | 45 | . | (FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, RIGHT HAND THREAD WITH KEYWAY. | | 46 | . | (FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, RIGHT HAND THREAD WITH KEY SLOT. | | 47 | . | (FRICTION PRODUCTS ONLY) MALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT , LEFT HAND THREAD WITH KEYWAY. | | 48 | . | (FRICTION PRODUCTS ONLY) FEMALE SPHERICAL ROD END BEARING, HIGH MISALIGNMENT, LEFT HAND THREAD WITH KEY SLOT. | | 501 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, PLAIN. | | 502 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, FLANGED, UNLINED FLANGE FACE. | | 503 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, FLANGED, LINED FLANGE FACE. | | 504 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC JLINED, SLEEVE IN BORE. | | 506 | . | (FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION, FILAMENT WOUND, TFE-FABRIC LINED THREAD FORMS. | | 601 | . | (FRICTION PRODUCTS ONLY) ANNULAR BEARING, TFE-FABRIC LINED, NARROW FILAMENT WOUND OUTER RING. | | 602 | . | (FRICTION PRODUCTS ONLY) ANNULAR BEARING, TFE-FABRIC LINED, WIDE FILAMENT WOUND OUTER RING. | | 603 | . | (FRICTION PRODUCTS ONLY) ANNULAR BEARING, TFE-FABRIC LINED, HIGH MISALIGNMENT, FILAMENT WOUND OUTER RING. | | 604 | . | (FRICTION PRODUCTS ONLY) ANNULAR BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, SPECIAL CONFIGURATION . | | 606 | . | (FRICTION PRODUCTS ONLY) MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED ROD, LIGHT SERIES. | | 607 | . | (FRICTION PRODUCTS ONLY) MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED SHANK, HEAVY SERIES. | | 608 | . | (FRICTION PRODUCTS ONLY) MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED SHANK, HIGH MISALIGNMENT. | | 609 | . | (FRICTION PRODUCTS ONLY) FEMALE ROD END BEARING, TFE-FABRIC LINED FILAMENT WOUND OUTER RING, LIGHT SERIES. | | 610 | . | (FRICTION PRODUCTS ONLY) FEMALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, HEAVY SERIES. | | 611 | . | (FRICTION PRODUCTS ONLY) ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, SPECIAL CONFIGURATION. | | 701 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, PLAIN, INDUSTRIAL APPLICATION | | 702 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, FLANGED, UNLINED FLANGED FACE, INDUSTRIAL APPLICATION. | | 703 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, FLANGED, LINED FLANGE FACE, INDUSTRIAL APPLICATION. | | 704 | . | (FRICTION PRODUCTS ONLY) JOURNAL BEARING, FILAMENT WOUND, TFE-FABRIC LINED, SLEEVE IN BORE, INDUSTRIAL APPLICATION. | | 706 | . | (FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION, FILAMENT WOUND, TFE-FABRIC, LINED THREAD FORMS, INDUSTRIAL APPLICATION. | | 801 | . | (FRICTION PRODUCTS ONLY) ANNULAR BEARING, TFE-FABRIC LINED, NARROW FILAMENT WOUND OUTER RING, INDUSTRIAL APPLICATION. | | 802 | . | ANNULAR BEARING, TFE-FABRIC LINED, WIDE FILAMENT WOUND OUTER RING, INDUSTRIAL APPLICATION. | | 803 | . | ANNULAR BEARING, TFE-FABRIC LINED, HIGH MISALIGNMENT, FILAMENT WOUND OUTER RING, INDUSTRIAL APPLICATION. | | 804 | . | ANNULAR BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, SPECIAL CONFIGURATION, INDUSTRIAL APPLICATION. | | 806 | . | MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED ROD, LIGHT SERIES, INDUSTRIAL APPLICATION. | | 807 | . | MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED SHANK, HEAVY SERIES, INDUSTRIAL APPLICATION. | | 808 | . | MALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, THREADED SHANK, HIGH MISALIGNMENT, INDUSTRIAL APPLICATION. | | 809 | . | FEMALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, LIGHT SERIES, INDUSTRIAL APPLICATION. | | 810 | . | FEMALE ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, HEAVY SERIES, INDUSTRIAL APPLICATION. | | 811 | . | ROD END BEARING, TFE-FABRIC LINED, FILAMENT WOUND OUTER RING, SPECIAL CONFIGURATION, INDUSTRIAL APPLICATION. | | 90 | . | (FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION PLAIN BUSHING. | | 91 | . | (FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION SPHERICAL ANNULAR BEARING. | | 92 | . | (FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION TWO PIECE SPHERICAL ROD END BEARING. | | 93 | . | (FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION THREE PIECE SPHERICAL ROD END BEARING. | | 94 | . | (FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION SPHERICAL BEARING. TEFLON FABRIC IN BORE. | | 98 | . | (FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION, SPHERICAL BEARING, MISCELLANEOUS. | | 99 | . | (FRICTION PRODUCTS ONLY) SPECIAL CONFIGURATION, SPHERICAL BEARING, LINK ASSEMBLY. | | A | . | INDUSTRIAL ROLLER BEARING EQUIPPED WITH TWO OPEN AUXILIARY CAP SEALS (AS : AZA-) . | | A | . | PILLOW BLOCK SERIES DESIGNATION.*** | | A | . | DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING, REGULAR SERIES (NEW SERIES DAS) . | | AB | . | DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING, REGULAR SERIES, WIDER SLEEVE (NEW SERIES DAS) . | | AD | . | DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING, SIMILAR TO "C" SERIES EXCEPT METAL SEAL PLATES ONLY (NEW SERIES DAL) . | | AE | . | DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING,*** (NEW SERIESI-DAS) . | | AEF | . | DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING, TWO FELT CONTACT SEALS*** (USE NEW DAS SERIES) . | | AF | . | MODIFICATION OF DOUBLE-ROW AIRCRAFT BEARINGS "A", "AB", AND "AD" SERIES*** (USE NEW DAS SERIES) . | | AP | . | AIRCRAFT DOUBLE-ROW BEARING, INTERCHANGEABLE WITH AN207DP BALL BEARING. | | AR | . | SINGLE-ROW FEMALE THREAD AIRCRAFT ROD END, (ARA PREFIX, ONE BEARING ONLY) (NEW SERIES SF) . | | ARE | . | AIRCRAFT ROD END BEARING, SINGLE-ROW, SELF-ALIGNING, TWO SHIELDS, FEMALE THREADS,*** (USE SF SERIES) . | | ATE | . | AIRCRAFT ROD END BEARING, SINGLE-ROW, SELF-ALIGNING, TWO SHIELDS, MALE THREADS,*** (USE SM SERIES). | | ATFA | . | ANNULAR BEARING, TFE-FABRIC LINED, ALUMINUM, NARROW OUTER RING. | | ATFA-100 | . | ANNULAR BEARING, TFE-FABRIC LINED, ALUMINUM, WIDE OUTER RING. | | ATGA | . | ANNULAR BEARING, TFE-FABRIC LINED, ALUMINUM, NARROW GROOVED OUTER RING. | | ATGA-100 | . | ANNULAR BEARING, TFE-FABRIC LINED, ALUMINUM, WIDE GROOVED OUTER RING. | | B | . | INDUSTRIAL ROLLER BEARING FLANGE UNIT,***. | | B | . | INDUSTRIAL ROLLER BEARING EQUIPPED WITH ONE OPEN AND ONE CLOSED AUXILIARY CAP SEAL (AS: BZA-) . | | B | . | SINGLE-ROW AIRCRAFT BEARING (NEW SERIES SA) . | | BP | . | SINGLE-ROW AIRCRAFT BEARING, CYLINDRICAL O.D., INTERCHANGEABLE FOR AN-200-KP AND KS BALL BEARINGS, DOUBLE-ROW SLEEVE TYPE (NEW SERIES SA) . | | BR | . | DOUBLE-ROW AIRCRAFT BEARING, SELF-ALIGNING, TWO SHIELDS AND BUNA-"N" SEALS, SLEEVED INNER RING (NEW SERIES DAS). | | C | . | INDUSTRIAL ROLLER BEARING TAKEUP UNIT,*** | | C | . | DOUBLE-ROW AIRCRAFT ROLLER BEARING, SELF-ALIGNING, ONE PIECE INNER RACE FITTED WITH POSITIVE SEALS (NEW SERIES DA) . | | D | . | DOUBLE-ROW INDUSTRIAL ROLLER BEARING, RADIAL THRUST BEARING,*** | | DA | . | NEW SERIES AIRCRAFT DOUBLE-ROW ANNULAR BEARING WITH NO SLEEVES OR COLLARS. | | DA | . | INDUSTRIAL BEARING DUPLEX UNIT,*** | | DAC | . | NEW SERIES DOUBLE-ROW AIRCRAFT ANNULAR BEARING WITH COLLARS ONLY. | | DAL | . | NEW SERIES DOUBLE-ROW AIRCRAFT ANNULAR BEARING WITH NO SLEEVES OR COLLARS (SEAL GROOVE FLAT - LAND) . | | DAS | . | NEW SERIES DOUBLE-ROW AIRCRAFT ANNULAR BEARING WITH SLEEVES AND COLLARS. | | DAT | . | NEW SERIES DOUBLE-ROW AIRCRAFT ANNULAR BEARING, TORQUE TUBE TYPE. | | DDR | . | NEW SERIES DOUBLE-ROW DOUBLE EYE AIRCRAFT LINK BEARING. | | DE | . | DOUBLE-ROW INDUSTRIAL ROLLER BEARING, SELF-ALIGNING, NON-SEPARABLE,*** | | DE | T | DOUBLE-ROW SELF-ALIGNING INDUSTRIAL ROLLER BEARING, TAPERED BORE,*** | | DF | . | NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, FEMALE ROD END WITH HEX BOTTOM (OR WRENCH FLAT) . | | DFP | . | NEW SERIES DOUBLE-ROW AIRCRAFT BEARING, FEMALE ROD END WITH PLAIN BOTTOM. | | DL | . | INDUSTRIAL BEARING DUPLEX UNIT,*** | | DM | . | NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, MALE ROD AND THREADED. | | DMD | . | NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, MALE THREADED "D" HEAD ROD END. | | DMH | . | NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, MALE THREADED ROD END, HOLLOW SHANK. | | DP | . | SPECIAL DOUBLE-ROW AIRCRAFT ROLLER BEARING WITH BUNA-"N" SEALS (NEW SERIES DAT) . | | DPH | . | NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, PLAIN HOLLOW SHANK. | | DPS | . | NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, MALE ROD END PLAIN SHANK, SOLID | | DR | . | INDUSTRIAL ROLLER BEARING DUPLEX UNIT. | | DRX | . | NEW SERIES DOUBLE-ROW AIRCRAFT ROLLER BEARING, SPECIAL CONFIGURATION. | | DS | . | SPECIAL DOUBLE-ROW AIRCRAFT ROLLER BEARING WITH STAINLESS STEEL SHIELDS ONLY,*** | | DT | . | DOUBLE-ROW AIRCRAFT BEARING, STRAIGHT ROLLER (TORQUE TUBE BEARING),*** (NEW SERIES DAT) . | | DT | A | SUPERSEDES "DT" SERIES, PROVIDED WITH POSITIVE ALIGNMENT STOP (NEW SERIES DAT) . | | E | . | INDUSTRIAL ROLLER BEARING DUPLEX UNIT,*** | | FA | . | INDUSTRIAL ROLLER BEARING FLANGE UNIT,*** | | FC | . | INDUSTRIAL ROLLER BEARING OUTBOARD FLANGE UNIT,*** | | FR | . | AIRCRAFT ROLLER, BEARING, ROD END, SINGLE-ROW, FEMALE THREADS (NEW SERIES SF) . | | FS | . | INDUSTRIAL ROLLER BEARING FLANGE HOUSING UNIT,*** | | HR | . | AIRCRAFT ROLLER BEARING, SINGLE-ROW, HOLLOW SHANK ROD END (NO THREAD) (NEW SERIES SPH) . | | L | . | INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT,*** | | MA | . | AIRCRAFT ROLLER BEARING, SINGLE-ROW, SPECIAL 2 DEGREE ALIGNMENT ROD END (AM-6 ONLY MODEL FOR LOCKHEED) . | | ML | . | INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT,*** | | ML | . | LOCK-NUT DESIGNATION, USED ON INDUSTRIAL ROLLER BEARINGS. | | MR | . | AIRCRAFT ROLLER BEARING, SINGLE-ROW ROD END, MALE THREAD (NEW SERIES SM) . | | MRE | . | AIRCRAFT ROLLER BEARING***, SINGLE-ROW, SELF-ALIGNING, MALE THREAD ROD END, *** (REPLACED BY SM SERIES) . | | MRX | . | NEW SERIES MULTIPLE ROW ROLLER BEARING, SPECIAL CONFIGURATION. | | MS | . | INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT,*** | | MW | . | INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT,*** | | N | . | INDUSTRIAL BEARING LOCK-NUT | | PA | . | INDUSTRIAL ROLLER BEARING PILLOW BLOCK,*** | | PAC | . | INDUSTRIAL ROLLER BEARING PEDESTAL TYPE PILLOW BLOCK,*** | | PAF | . | INDUSTRIAL ROLLER BEARING PEDESTAL TYPE PILLOW BLOCK,*** | | PL | . | INDUSTRIAL ROLLER BEARING PILLOW BLOCK,*** | | PR | . | AIRCRAFT ROLLER BEARING, SINGLE-ROW, PLAIN SOLID SHANK ROD END (NO THREADS) ,*** (USE SPS SERIES) . | | RF | . | AIRCRAFT ROLLER BEARING, SINGLE-ROW, FEMALE ROD END USING AR-3 ROD END EYE ONLY, (NEW SERIES SF) . | | S | . | 3- INCH DIAMETER CONVEYOR ROLLS SERIES,*** | | SA | . | NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, ANNULAR WITH NO SLEEVES AND COLLARS. | | SAL | . | NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, ANNULAR WITH NO SLEEVES AND COLLARS, WITH SEAL GROOVE FLAT. | | SAT | . | NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, ANNULAR, TORQUE TUBE TYPE. | | SC | . | 2-1/4 INCH DIAMETER CONVEYOR ROLLS SERIES.*** | | SD | . | 4 INCH DIAMETER CONVEYOR ROLLS SERIES,*** | | SDR | . | NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, DOUBLE EYE LINK BEARING. | | SE | . | 5-INCH DIAMETER, CONVEYOR ROLL SERIES,*** | | SF | . | 6-INCH DIAMETER CONVEYOR ROLL SERIES,*** | | SF | . | NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, FEMALE THREADED ROD END WITH HEX BOTTOM (OR WRENCH FLAT) . | | SFP | . | NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, FEMALE THREADED ROD END WITH PLAIN BOTTOM. | | SM | . | NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, MALE THREADED ROD END. | | SMD | . | NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, MALE THREADED "D" HEAD ROD END. | | SMH | . | NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, MALE THREADED ROD END, HOLLOW SHANK. | | SPH | . | NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, ROD END, PLAIN HOLLOW SHANK. | | SPS | . | NEW SERIES SINGLE-ROW AIRCRAFT ROLLER BEARING, ROD END, PLAIN SHANK, SOLID . | | SRX | . | NEW SERIES, SINGLE-ROW AIRCRAFT ROLLER BEARING, SPECIAL CONFIGURATION. | | ST | . | AIRCRAFT ROLLER BEARING, SINGLE-ROW MALE THREADED ROD END (NEW SERIES SM) | | SV | . | AIRCRAFT ROLLER BEARING, SINGLE-ROW, FEMALE THREADED ROD END, NO GREASE FITTINGS . | | TFA | . | ANNULAR BEARING, TFE-FABRIC LINED, STEEL, NARROW OUTER RING. | | TFA-100 | . | ANNULAR BEARING, TFE-FABRIC LINED, STEEL, WIDE OUTER RING. | | TFA-200 | . | ANNULAR BEARING, TFE-FABRIC LINED, STEEL, HIGH MISALIGNMENT. | | TFF | . | FEMALE ROD END BEARING, TFE-FABRIC LINED, LIGHT DUTY | | TFF-400 | . | FEMALE ROD END BEARING, TFE-FABRIC LINED, PER MIL-B-8948. | | TFM | . | MALE ROD END BEARING, TFE-FABRIC LINED, LIGHT DUTY. | | TFM-200 | . | MALE ROD END BEARING, TFE-FABRIC LINED, HIGH MISALIGNMENT. | | TFM-400 | . | MALE ROD END BEARING, TFE-FABRIC LINED, PER MIL-B-8948. | | TGA | . | ANNULAR BEARING, TFE-FABRIC LINED, STEEL, NARROW GROOVED OUTER RING. | | TGA-100 | . | ANNULAR BEARING, TFE-FABRIC LINED, STEEL, WIDE GROOVED OUTER RING. | | TGA-200 | . | ANNULAR BEARING, TFE-FABRIC LINED, STEEL, HIGH MISALIGNMENT, GROOVED OUTER RING. | | TL | . | INDUSTRIAL ROLLER BEARING TAKE-UP,*** | | TR | . | INDUSTRIAL ROLLER BEARING TAKE-UP,*** | | W | . | INDUSTRIAL ROLLER BEARING LOCK WASHER | | XC | A | SPLIT TYPE INDUSTRIAL ROLLER BEARING PILLOW BLOCK ADAPTER MOUNTING, DOUBLE-ROW TAPERED BORE,*** | | YD | . | AIRCRAFT ROLLER BEARING, DOUBLE-ROW, SPECIAL SERIES | | YS | . | AIRCRAFT ROLLER BEARING, SINGLE-ROW SPECIAL SERIES | | YTA | . | ANNULAR BEARING, TFE-FABRIC LINED, SPECIAL SERIES | | YTD | . | TFE-FABRIC LINED BEARING, SPECIAL CONFIGURATION | | YTF | . | FEMALE ROD END BEARING, TFE-FABRIC LINED, SPECIAL SERIES | | YTM | . | MALE ROD END BEARING, TFE-FABRIC LINED, SPECIAL SERIES | | ZA | . | DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING PILLOW BLOCK, DOUBLE-ROW BEARING. | | ZAT | . | FRAME ONLY FOR INDUSTRIAL ROLLER BEARING TAKE-UP UNIT. | | ZAT-2000 | . | NORMAL DUTY INDUSTRIAL ROLLER BEARING TAKE-UP UNIT WITH FRAME. | | ZB | . | DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING FLANGE HOUSING UNIT, NORMAL DUTY, DOUBLE-ROW. | | ZBR | . | DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING FLANGE CARTRIDGE UNIT, NORMAL DUTY, DOUBLE-ROW. | | ZBT | . | DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING FLANGE CARTRIDGE UNIT, HEAVY DUTY, DOUBLE-ROW. | | ZC | . | DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING TAKE-UP UNIT, DOUBLE-ROW, *** (SEE ZT-2000 SERIES) . | | ZD | . | INDUSTRIAL ROLLER BEARING HEAVY DUTY DUPLEX UNIT, SELF-ALIGNING, SEALS IN END PLATE, WITH SHIMS FOR ADJUSTING BEARING (SEE ZD-5000 SERIES). | | ZD-2000 | . | INDUSTRIAL ROLLER BEARING NORMAL DUTY DUPLEX UNIT, SELF-ALIGNING, WITH SEALS AND SHIMS. | | ZD-5000 | . | HEAVY DUTY INDUSTRIAL ROLLER BEARING DUPLEX UNIT, SELF-ALIGNING, WITH SEALS AND SHINS. | | ZE | . | NORMAL DUTY INDUSTRIAL ROLLER BEARING DUPLEX UNIT, SELF-ALIGNING, WITH SEALS AND SHIMS. | | ZES | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, HEAVY DUTY, BOOT END,*** (SEE ZET-5000 SERIES) . | | ZET | . | INDUSTRIAL ROLLER BEARING TAKE-UP FRAME ONLY. | | ZET-5000 | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT AND FRAME ASSEMBLY, BOOT END. | | ZF | . | DIRECT MOUNTED SELF-ALIGNING INDUSTRIAL ROLLER BEARING FLANGE HOUSING UNIT, HEAVY DUTY, DOUBLE-ROW. | | ZFA | . | INDUSTRIAL ROLLER BEARING .FLANGE BLOCK, ADAPTER SERIES. | | ZFB | . | INDUSTRIAL ROLLER BEARING EXPANSION FLANGE BLOCK, ADAPTER SERIES. | | ZFS | . | INDUSTRIAL ROLLER BEARING EXPANSION FLANGE BLOCK, HEAVY DUTY. | | ZGS | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, HEAVY DUTY, HEAD END. | | ZGT | . | TAKE-UP FRAME ONLY FOR INDUSTRIAL ROLLER BEARING TAKE-UP. | | ZGT-5000 | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT AND FRAME ASSEMBLY, HEAD END. | | ZHT | . | TAKE-UP FRAME ONLY FOR INDUSTRIAL ROLLER BEARING TAKE-UP, CENTER PULL TYPE. | | ZHT-2000 | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT AND FRAME ASSEMBLY, NORMAL DUTY. | | ZHT-5000 | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT AND FRAME ASSEMBLY, HEAVY DUTY. | | ZHTL | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, EXTRA HEAVY DUTY, LEFT HAND,*** | | ZL | . | INDUSTRIAL ROLLER BEARING DIRECT MOUNTED SELF-ALIGNING CARTRIDGE UNIT, NORMAL DUTY, DOUBLE-ROW. | | ZM | . | INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT, HEAVY DUTY, LARGE O.D. | | ZMA | . | INDUSTRIAL ROLLER BEARING CARTRIDGE, ADAPTER SERIES. | | ZMB | . | INDUSTRIAL ROLLER BEARING EXPANSION CARTRIDGE, ADAPTER SERIES. | | ZMC | . | INDUSTRIAL ROLLER BEARING EXPANSION CARTRIDGE, SPECIAL,*** | | ZMF | . | INDUSTRIAL ROLLER BEARING CARTRIDGE, SPECIAL,*** | | ZMR | . | INDUSTRIAL ROLLER BEARING CARTRIDGE, SPECIAL,*** | | ZMV | . | INDUSTRIAL ROLLER BEARING CARTRIDGE, SPECIAL,*** | | ZMW | . | INDUSTRIAL ROLLER BEARING CARTRIDGE UNIT, HEAVY DUTY | | ZMX | . | INDUSTRIAL ROLLER BEARING EXPANSION CARTRIDGE, HEAVY DUTY. | | ZMY | . | INDUSTRIAL ROLLER BEARING CARTRIDGE, SPECIAL. | | ZN | . | INDUSTRIAL ROLLER BEARING HANGER BOX,*** | | ZN-2000 | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, NORMAL DUTY. | | ZN-5000 | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, HEAVY DUTY. | | ZNT | . | INDUSTRIAL ROLLER BEARING TAKE-UP FRAME ONLY. | | ZNT-2000 | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT WITH FRAME ASSEMBLY NORMAL DUTY. | | ZNT-5000 | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT WITH FRAME ASSEMBLY, HEAVY DUTY. | | ZP | . | DIRECT MOUNTED INDUSTRIAL ROLLER BEARING PILLOW BLOCK, HEAVY DUTY, DOUBLE-ROW, FIXED TYPE. | | ZPA | . | ADAPTER MOUNTED SELF-ALIGNING ROLLER BEARING PILLOW-BLOCK, DOUBLE-ROW, FIXED TYPE. | | ZPB | . | ADAPTER MOUNTED SELF-ALIGNING ROLLER BEARING PILLOW-BLOCK, EXPANSION (FLOATING) TYPE, DOUBLE-ROW. | | ZPC | . | INDUSTRIAL ROLLER BEARING PILLOW BLOCK, HEAVY DUTY (PEDESTAL TYPE),*** | | ZRT | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT, HEAVY DUTY,*** (SEE ZN-5000 SERIES) . | | ZST | . | INDUSTRIAL ROLLER BEARING TAKE-UP UNIT AND FRAME,*** | | ZT | . | DIRECT MOUNTED SELF-ALIGNING ROLLER BEARING TAKE-UP UNIT, HEAVY DUTY, DOUBLE -ROW,*** | | ZT-2000 | . | INDUSTRIAL ROLLER BEARING TAKE-UP BLOCK ONLY, NORMAL DUTY. | | ZT-5000 | . | INDUSTRIAL ROLLER BEARING TAKE-UP BLOCK ONLY, HEAVY DUTY. |
|
