Prefix | Suffix | Definition |
. | . | EXAMPLE: CN-07237 |
. | A | CONE DIFFERENT BORE FROM STANDARD BASIC PART NUMBER. EXAMPLES: 495A VS 495 (NON-INTERCHANGEABLE) 567A VS 567 (NON-INTERCHANGEABLE) |
. | A | CONE DIFFERENT RADIUS FROM STANDARD BASIC PART NUMBER. EXAMPLES: 350A VS 350 (350 HAS LARGER RADIUS) 464A VS 464 (464 HAS LARGER RADIUS) |
. | A | CUP DIFFERENT O.D. FROM STANDARD BASIC PART NUMBER. EXAMPLE: 493A VS 493 (NON-INTERCHANGEABLE) |
. | A | CUP DIFERENT RADIUS FROM STANDARD BASIC PART NUMBER. EXAMPLE: 452A VS 452 (452A HAS LARGER RADIUS) |
. | A | CUP DIFFERENT LENGTH FROM STANDARD BASIC PART NUMBER. EXAMPLE: 394A VS 394 (NON-INTERCHANGEABLE) |
. | AA | CONE AND CUP DIFFERENT BORE OR O.D., OR LENGTH AND RADIUS FROM STANDARD BASIC PART NUMBER. EXAMPLE: 495AA VS 495A OR 495 |
. | AB | CUP FLANGED CUP (NON-INTERCHANGEABLE WITH STANDARD BASIC PART NUMBER) . EXAMPLE: 572AB VS 572 |
. | AC | DIFFERENT CUP WIDTH OR RADIUS FROM BASIC PART NUMBER. |
. | AC | CUP DIFFERENT O.D. OR LENGTH AND RADIUS FROM STANDARD BASIC PART NUMBER) . EXAMPLE: 453AC VS 453 (NON-INTERCHANGEABLE) |
. | AD | CUP DOUBLE CUP (NON-INTERCHANGEABLE WITH STANDARD BASIC PART NUMBER) . EXAMPLE: 592AD VS 592 (592 IS SINGLE CUP) |
. | ADW | DOUBLE CONE PILOTS AND SLOTS EACH END, HOLES IN LARGE RIB. |
. | AH | ASSEMBLED WITH SPECIAL CAGE, ROLLERS AND/OR INTERNAL GEOMETRY. |
. | AS | DIFFERENT BORE, OD, WIDTH OR RADIUS FROM BASIC PART NUMBER. |
. | AS | CONE AND CUP DIFFERENT BORE OR O.D. OR LENGTH AND RADIUS FROM STANDARD BASIC PART NUMBER. EXAMPLES: 372AS VS 372 (NON-INTERCHANGEABLE) 385AS VS 385 (NON-INTERCHANGEABLE) |
. | AV | MADE OF SPECIAL STEEL. |
. | AW | KEYWAY OR SLOTTED CONE RACE OR OUTER RACE. |
. | AW | CONE AND CUP KEYWAY OR SLOTTED CONE OR CUP. EXAMPLE: 389AW VS 389A (NON-INTERCHANGEABLE) |
. | AX | DIFFERENT BORE, OD, WIDTH, OR RADIUS FROM BASIC PART NUMBER. |
. | AX | CONE AND CUP DIFFERENT BORE OR O.D. OR LENGTH AND RADIUS FROM STANDARD BASIC PART NUMBER. EXAMPLES: 453AX VS 453 (NON-INTERCHANGEABLE) 495AX VS 495 (NON-INTERCHANGEABLE) |
. | AXD | ISO OUTER RACE - DOUBLE OUTER RACE WITHOUT OIL HOLES OR GROOVE. |
. | B | CUP FLANGED CUP (NON-INTERCHANGEABLE WITH STANDARD BASIC PART NUMBER) EXAMPLE: 572B VS 572 |
. | B | CONE CONE USING BRASS CAGE. |
. | BS | CUP FLANGED CUP (NON-INTERCHANGEABLE WITH STANDARD BASIC PART NUMBER) . EXAMPLE: 332BS VS 332 |
. | BW | CUP FLANGED CUP WITH SLOT (NON-INTERCHANGABLE WITH STANDARD BASIC PART NUMBER) . EXAMPLE: 432BW VS 432 |
. | C | CUP DIMENSIONALLY DIFFERENT FROM BASIC PART NUMBER (NON-INTERCHANGEABLE). |
. | C | SINGLE CONE RACE, ENVELOPE DIMENSION SAME AS BASIC PART NUMBER. |
. | CA | DIFFERENT INTERNAL GEOMETRY. |
. | CD | DOUBLE CUP WITH OIL HOLES AND GROOVE. ONE HOLE COUNTER-BORED FOR LOCKING PIN. |
. | CP | CONE AND CUP FLASH CHROME PLATED. OTHERWISE, INTERCHANGEABLE WITH STANDARD BASIC PART NUMBER. EXAMPLES: 18200CP (SUFFIX ELECTRIC PENCIL ETCHED) 18337CP (SUFFIX ELECTRIC PENCIL ETCHED) |
. | CR | CONE AND CUP RIB CUP BEARING SERIES. |
. | CX | DIMENSIONALLY DIFFERENT FROM BASIC PART NUMBER (NON-INTERCHANGEABLE). |
. | D | CONE AND CUP DOUBLE CONE OR DOUBLE CUP (NON-INTERCHANGEABLE WITH STANDARD BASIC PART NUMBER) . EXAMPLES: 581D VS 581 (581 IS SINGLE CONE) 572D VS 572 (572 IS SINGLE CONE) |
. | DA | CONE DOUBLE CONE (NON-INTERCHANGEABLE WITH CONES HAVING SAME BASIC PART NUMBER) . EXAMPLE: 378DA VS 378DE |
. | DA | CUP SPHERICAL O.D. DOUBLE CUP (NON-INTERCHANGEABLE WITH STANDARD BASIC PART NUMBER OR OTHER DOUBLE CUPS HAVING SAME BASIC NUMBERS) . EXAMPLES: 472D VS 472DD |
. | DB | CUP DOUBLE CUP WITH FLANGE (NON-INTERCHANGEABLE WITH STANDARD BASIC PART NUMBER OR OTHER DOUBLE CUPS HAVING SAME BASIC NUMBERS) . EXAMPLE: 09195DB VS 09195 |
. | DC | CUP DOUBLE CUP WITH HOLE FOR LOCKING PIN. |
. | DD | CONE AND CUP SPECIAL LONG DOUBLE CONE OR CUP (NON-INTERCHANGEABLE WITH STANDARD BASIC PART NUMBER OR OTHER DOUBLE PARTS HAVING SAME BASIC NUMBERS) . EXAMPLE: 563DD |
. | DE | DOUBLE CONE OR DOUBLE CUP HAVING DIFFERENT DIMENSIONS OR OTHER CHARACTERISTICS FROM SINGLE AND DOUBLE PARTS IDENTIFIED WITH THE SAME BASIC PART NUMBER. |
. | DGW | CONE DOUBLE CONE WITH PRESSURE REMOVAL GROOVE IN BORE, AND HAVING FACE SLOTS. |
. | DH | DOUBLE CONE RACE WITH SPECIAL CAGE, ROLLERS AND/OR INTERNAL GEOMETRY. |
. | DP | CONE DOUBLE CONE WITH PULLER GROOVE. |
. | DR | CUP DOUBLE CUP FOR RIB CUP SERIES (NON-INTERCHANGEABLE WITH SINGLE AND DOUBLE CUPS IDENTIFIED WITH SAME BASIC NUMBER) . |
. | DS | CUP CROWNED O.D. DOUBLE CUP (NON-INTERCHANGEABLE WITH OTHER CUPS HAVING SAME BASIC PART NUMBERS) . EXAMPLE: 95927DS VS 95927D |
. | DT | CUP TAPERED O.D. DOUBLE CUP (NON-INTERCHANGEABLE WITH OTHER CUPS HAVING SAME BASIC PART NUMBERS) . EXAMPLE: 473DT |
. | DV | DOUBLE CONE OR DOUBLE CUP RACE MADE OF SPECIAL STEEL. |
. | DW | CONE AND CUP DOUBLE CONE OR DOUBLE CUP WITH KEYWAY OR SLOT (NON-INTERCHANGEABLE WITH CONES OR CUPS IDENTIFIED WITH SAME 'BASIC PART NUMBERS) . EXAMPLES: 378DW VS 378DA 128170DW VS 128170DA |
. | DX | CUP ADAPTOR FOR SPHERICAL OR STRAIGHT O.D. CUP. EXAMPLE: 128196DX (ADAPTOR FOR 128170DA CUP) |
. | DX | CUP THREADED O.D. DOUBLE CUP (NON-INTERCHANGEABLE WITH CUPS IDENTIFIED WITH SAME BASIC PART NUMBERS) . |
. | E | CONE AND CUP CONES OR CUPS HAVING SPECIAL CHARACTERISTICS DIFFERING FROM AND NON-INTERCHANGEABLE WITH OTHER CONES OR CUPS IDENTIFIED WITH THE SAME BASIC PART NUMBERS . EXAMPLES: 6E (EXTRA LARGE O.D.) 742E (ROTARY GROUND FRONT FACE) |
. | ED | CUP DOUBLE CUP (NON- INTERCHANGEABLE WITH OTHER CUPS IDENTIFIED WITH SAME BASIC PART NUMBERS) . EXAMPLE: 384ED VS 384AD |
. | F | CONE ASSEMBLED WITH POLYMER CAGE. |
. | G | CONE RETAINER GROOVE IN BORE. |
. | H | CONE ASSEMBLED WITH SPECIAL CAGE, ROLLERS AND/OR INTERNAL GEOMERY. |
. | HR | SPECIAL CUP USED ON 'HYDRA-RIB' BEARING. |
. | K | CONE AND CUP FACTORY IDENTIFICATION ONLY. NOT PART OF NUMBER AND UNRELATED TO PHYSICAL DIMENSIONS. (INTERCHANGEABLE WITH OTHER CONES AND CUPS HAVING SAME BASIC PART NUMBERS) . |
. | L | CONE CONE ASSEMBLED WITH DUO-FACED SEALS. |
. | MM | CONE AND CUP FACTORY IDENTIFICATION ONLY. NOT PART OF NUMBER AND UNRELATED TO PHYSICAL DIMENSIONS (INTERCHANGEABLE WITH OTHER CONES AND CUPS HAVING SAME BASIC PART NUMBERS) . |
. | NA | CUP SUFFIX ELECTRIC PENCIL ETCHED ON DOUBLE CUPS MATED WITH TWO "NA" TYPE SINGLE CONES TO FORM DOUBLE ROW NON-ADJUSTABLE BEARINGS. |
. | NC | CUP CUSHIONED CUP (USUALLY NEOPRENE) . |
. | NR | CONE "NA" TYPE RIBLESS CONE FOR RIB CUP SERIES. |
. | NW | CONE "NA" TYPE CONE WITH SLOTTED FRONT FACE. |
. | NX | CONE LAPPED FRONT FACE |
. | P | CONE PULLER GROOVE. |
. | R | CONE AND CUP BOCK TYPE BEARING . EXAMPLES: 6358-R AND 6552-R |
. | RB | CUP SNAP RING ON O.D. EXAMPLES: 3822-RB, 15523-RB |
. | S | CONE AND CUP SPECIAL FEATURE BEARING. NOT INTERCHANGEABLE WITH BEARINGS HAVING SAME BASIC PART NUMBERS. |
. | SA | CONE AND CUP SPECIAL FEATURE BEARING. NOT INTERCHANGEABLE WITH BEARINGS HAVING SAME BASIC PART NUMBERS. |
. | SB | CONE CONE WITH BRASS CAGE. |
. | SB | CUP FLANGED CUP. |
. | SC | CONE CONE WITH SQUARE BORE. |
. | SD | CONE AND CUP DOUBLE CONE WITH SQUARE BORE OR DOUBLE CUP. |
. | SH | SPECIAL FEATURE BERING, WITH SPECIAL CAGE, ROLLERS AND/OR INTERNAL GEOMETRY (NON-INTERCHANGEABLE WITH BEARINGS HAVING SAME BASIC PART NUMBERS). |
. | SW | CONE AND CUP SLOT OR KEYWAY. NOT INTERCHANGEABLE WITH BEARINGS HAVING SAME BASIC PART NUMBERS. |
. | T | CONE TAPERED BORE. |
. | T | CUP TAPERED O.D. |
. | TA | CONE TAPERED BORE "NA" TYPE CONE. |
. | TA | CUP TAPERED O.D. |
. | TB | CONE TAPERED BORE CONE WITH BRASS CAGE. |
. | TD | CONE TAPERED BORE DOUBLE CONE. |
. | TDE | DOUBLE CONE WITH TAPERED BORE AND EXTENDED RIB. |
. | TDH | DOUBLE CONE WITH TAPERED BORE, SPECIAL CAGE, ROLLERS, OR INTERNAL GEOMETRY. |
. | TDL | CONE TAPERED BORE, DOUBLE CONE, WITH INTERLOCK FEATURE. |
. | TDV | DOUBLE CONE WITH TAPERED BORE. MADE OF SPECIAL STEEL. |
. | TE | CONE TAPERED BORE CONE WITH EXTENDED RIB. |
. | TEV | SINGLE CONE, TAPERED BORE, EXTENDED LARGE RIB. MADE OF SPECIAL STEEL. |
. | TL | CONE TAPERED BORE WITH INTERLOCK FEATURE. |
. | TLE | CONE TAPERED BORE WITH INTERLOCK FEATURE AND EXTENDED WIDTH. |
. | TP | CONE TAPERED BORE CONE WITH PULLER GROOVE. |
. | TW | CONE AND CUP TAPERED CONE BORE OR CUP O.D. WITH SLOTS OR KEYS. |
. | U | CONE OR CUP - BASIC SERIES PART NUMBER, UNITIZED, SELF-CONTAINED. |
. | V | CONE AND CUP OBSOLETE TYPE BEARING DESIGN. NOT PART OF NUMBER AND NO RELATION TO PHYSICAL DIMENSIONS. |
. | V7E | CONE AND CUP EXTENDED KEYWAY CONE OR CUP. |
. | W | CONE AND CUP SLOT OR KEYWAY. |
. | W | CONE TYPE 12 SLOT. |
. | WA | CONE TYPE SI SLOT. |
. | WB | CONE TYPE 13 SLOT. |
. | WC | CONE WITH SLOTS OR KEYWAYS. |
. | WD | CONE SPECIAL TYPE SLOT. |
. | WE | CONE TYPE #4 SLOT. |
. | WS | CONE OR CUP - SLOTS OR KEYWAYS. |
. | X | CONE SLOT OR KEYWAY. |
. | X | CONE AND CUP SPECIAL FEATURE BEARING. NOT INTERCHANGEABLE WITH BEARINGS HAVING SAME BASIC PART NUMBERS. EXAMPLES: 350X - SMALLER BORE 496X - LARGER BORE 525X - DIFFERENT RADIUS |
. | XD | DOUBLE CUP, NO OIL HOLES OR GROOVE. |
. | XP | SPECIAL CONE STEEL AND PROCESS. |
. | XW | CONE SLOTTED. |
. | XX | SINGLE CONE OR SINGLE CUP MADE OF SPECIAL STEEL. |
. | YD | DOUBLE CUP WITH OIL HOLES, NO GROOVE. |
. | Z | CUP OR CONE CLOSE STAND PART. |
A | . | CONE AND CUP STANDARD BASIC SERIES PART NUMBER EXAMPLES: A2031 CONE, A2126 CUP |
CN | C | CUP DIMENSIONALLY DIFFERENT FROM STANDARD BASIC PART NUMBER. (NON- INTERCHANGEABLE) . EXAMPLE: 534C VS 534 CUP NEOPRENE CUSHIONED CUP. |
EE | . | CONE DOUBLE RIB - CLOSE GUIDED ROLLERS (NON-INTERCHANGEABLE WITH OTHER CONES IDENTIFIED WITH SAME BASIC PART NUMBERS) . EXAMPLE: EE141250D VS 14125OD |
EH | . | CONE AND CUP EXTRA HEAVY SERIES. |
EL | . | CONE AND CUP EXTRA LIGHT SERIES. |
EX | . | CONE AND CUP EXPERIMENTAL . |
F | . | CONE AND CUP FACTORY IDENTIFICATION ONLY. NOT PART OF NUMBER AND AND UNRELATED TO PHYSICAL DIMENSIONS (INTERCHANGEABLE WITH OTHER CONES AND CUPS HAVING SAME BASIC PART NUMBERS) . |
H | . | CONE AND CUP HEAVY SERIES (NON-INTERCHANGEABLE WITH OTHER CONES AND CUPS IDENTIFIED WITH SAME BASIC PART NUMBERS) . EXAMPLES: H242649 H242610 |
HH | . | CONE AND CUP HEAVY-HEAVY SERIES (NON-INTERCHANGEABLE WITH OTHER CONES AND CUPS IDENTIFIED WITH SAME BASIC PART NUMBERS) . EXAMPLES: HH926749 VS HM926749 HH926710 VS HM926710 |
HM | . | CONE AND CUP HEAVY-MEDIUM SERIES (NON-INTERCHANGEABLE WITH OTHER CONES AND CUPS IDENTIFIED WITH SAME BASIC PART NUMBERS) . EXAMPLES: HM926749 VS HH926749 HM926710 VS HH926710 |
J | . | CONE AND CUP STANDARD BASIC SERIES PART NUMBER, METRIC CONE BORE AND CUP O.D. EXAMPLES: JLM104948 VS JLM104910 CUP JH307749 CONE VS JH307710 CUP |
L | . | CONE AND CUP LIGHT SERIES. (NON-INTERCHANGEABLE WITH OTHER CONES AND CUPS IDENTIFIED WITH SAME BASIC PART NUMBERS. |
LL | . | CONE AND CUP LIGHT-LIGHT SERIES. |
LM | . | CONE AND CUP LIGHT-MEDIUM SERIES. |
M | . | CONE AND CUP MEDIUM SERIES. |
N | . | CONE BOCK OR GILLIAM TYPE BEARINGS. |
NA | NA | CONE TWO CONES MATED WITH DOUBLE CUP TO FORM DOUBLE ROW NON-ADJUSTABLE BEARING. (NON-INTERCHANGEABLE WITH OTHER CONES HAVING SAME BASIC PART NUMBERS WHICH MAY VARY IN BORE, O.D. LENGTH DIMENSIONS. |
R | . | CONE AND CUP GILLIAM REPLACEMENT SERIES. (NON-INTERCHANGEABLE WITH OTHER CONES AND CUPS IDENTIFIED WITH SAME BASIC NUMBER) . |
RC | . | CONE AND CUP SPECIAL RIBBED CUP BEARING. |
SX | . | SPECIAL EXPERIMENTAL. |
T | . | CONE THRUST BEARING ASSEMBLIES. EXAMPLES: T-76 , T-176, T-811 |
TC | . | CONE THRUST BEARING ASSEMBLE. EXAMPLE: TC-702 |
U | . | CONE AND CUP STANDARD BASIC SERIES PART NUMBER, UNITIZED SELF-CONTAINED BEARING. EXAMPLE: U399 CONE, U360L CUP |
XC | . | CONE AND CUP LIMITED PRODUCTION BEARINGS TO WHICH STANDARD SERIES PART NUMBERS HAVE NOT BEEN ASSIGNED. |